LOW PRICES WITH QUALITY AND GUARANTEE!
Search form

Tramontina Incasso Recessed Stainless Steel Black Steel Rectangular Hood with anti-fingerprint coating 75 cm 220 V

R$3.105,58

SKU 95800038 Categories ,

The Tramontina Incasso Built-in Hood in Black Steel Rectangular Stainless Steel with anti-fingerprint coating 75 cm 220 V, from the Prime line, guarantees a refined touch to any kitchen project with the exclusivity of the Black Steel finish. It will add to a more minimalist decor, as its structure is not exposed, as it is a built-in item, leaving only the black steel stainless steel detail apparent. In addition, it can be installed in exhaust or scrubber mode and its LED lamps ensure greater energy savings. With it, it is possible to renew the ambient air 12 times in just one hour, when installed in an environment of up to 19 m². The maximum noise of 63 dB(A), at speed 3, can be compared to a group conversation. For safety, which is an extremely important requirement, the hood offers a motor with an automatic shut-off device in case of overheating. Your kitchen will have an exclusive item of extreme quality, with good performance, beauty and elegance, guaranteeing discretion without going unnoticed by its functionality.

Doubts about shipping?

Click on one of the buttons below and send us a message.

Related products

Description

Tramontina Incasso Recessed Stainless Steel Black Steel Rectangular Hood with anti-fingerprint coating 75 cm 220 V

The Tramontina Incasso Built-in Hood in Black Steel Rectangular Stainless Steel with anti-fingerprint coating 75 cm 220 V, from the Prime line, guarantees a refined touch to any kitchen project with the exclusivity of the Black Steel finish. It will add to a more minimalist decor, as its structure is not exposed, as it is a built-in item, leaving only the black steel stainless steel detail apparent. In addition, it can be installed in exhaust or scrubber mode and its LED lamps ensure greater energy savings. With it, it is possible to renew the ambient air 12 times in just one hour, when installed in an environment of up to 19 m². The maximum noise of 63 dB(A), at speed 3, can be compared to a group conversation. For safety, which is an extremely important requirement, the hood offers a motor with an automatic shut-off device in case of overheating. Your kitchen will have an exclusive item of extreme quality, with good performance, beauty and elegance, guaranteeing discretion without going unnoticed by its functionality.

General information

Category: Prime
Installation: Embed
Voltage: 220V
Material: Black Steel Stainless Steel
Finish: Scotch Brite
Coating: Anti-Digital
Dimensions (Width x Height x Depth): 750x325x270mm
Frequency: 50 - 60 Hz
Maximum Power: 260W
Command: Pulsating
Speeds: 3
Noise Level: 63 db(A) – cf. IEC 60704 Standard
Flow: 630 m³/hour – cf. IEC 61591 Standard
Lighting: 2 LED bulbs (2 x 1.5 W)
Washable Metal Filter: 2
Charcoal Filter: Yes
– 2 (Model Carbon B)

Included Accessories:
– Fixing template.
– Deflector (Used for air outlet when installed in Debugger mode)
– 2 Carbon B activated carbon filters
– Metal flexible tube Ø160 mm (2 meters)
– Nylon clamp.

Illustrative Images. The shades and finishes (textures) may vary from one product to another.

Usage Recommendations

Check that the supply voltage indicated on the product identification label located on the inside of the hood is the same as your 220V home, the hood is not dual voltage.
In the exhaust function, the vapors and smoke from the cooking process enter the hood, are filtered through the metal filter where the fat is retained and conducted to the external environment through a duct.
In the debugger function, the vapors and smoke pass through a metal filter where the fat is retained and through an activated carbon filter where the air is purified, returning to the odor-free environment. In this case, it is not necessary to make an external opening for the outlet duct.
In both functions it is necessary to periodically clean the metal filters, and in the debugger function, the charcoal filter must be replaced and never washed and reused as per the instruction manual.
It is recommended that the installation of the hood be carried out by the Tramontina Authorized Service Network.
Installation by the consumer. Domestic use.
The hood must be installed at a minimum height of 650 mm and a maximum of 750 mm from the cooktop or stove burners.
For more information on how to clean the product, consult the instruction manual.
– Light dirt can be easily removed using a soft cloth or sponge with a neutral detergent (provided they do not contain chlorine or its derivatives).
– The use of TRAMONTINA stainless steel polishing paste is not recommended, as it can damage the finish. Only use Cleaner Inox – Superinox TRAMONTINA, applying in the direction of the stainless steel finish.
– Do not use products such as: bleach, chlorine-based sterilants and disinfectants, cleaning products for swimming pools, paint removers, battery acid and steel wool or any other abrasive product to clean stainless steel parts.

Technical specifications

HEIGHT
32.5 cm
WIDTH
27 cm
LENGTH
75 cm
WEIGHT
8.6 kg

*For single product, these specifications refer to the product.

*For set, kit or game, these specifications refer to the packaging.

Ref: 95800038

Reviews

There are no reviews yet.

Be the first to review “Coifa de Embutir Tramontina Incasso em Aço Inox Black Steel Retangular com revestimento anti digitais 75 cm 220 V”

Your email address will not be published. Required fields are marked *

premium WordPress plugins

Doubts about shipping?

This website uses cookies to ensure you get the best experience on our website. Read our privacy policy.