Description

Tramontina Dritta Black 90 Wall Hood in Stainless Steel with Black Automotive Paint 220 V 90 cm

You will find the exclusivity and sophistication of Tramontina products with the Tramontina Dritta Black Wall Hood in Stainless Steel with Black Automotive Paint 220 V 90 cm from the Prime Line. With a differentiated design and full of personality, the hood combines good taste and safety for your day-to-day. Tested by the best inspectors of the brand, it has a motor with a device that automatically turns it off in case of overheating. Produced in stainless steel with automotive paint in elegant black color, transforming the appearance of environments. It can be installed in two ways: in exhaust mode (without activated carbon filters and with holes in the wall/ceiling for air outlet) or purifier (with activated carbon filters and without holes in the wall/ceiling for air outlet). Take a unique and technological product into your home.

General information

3-speed pulsating control
Can be used as extractor or debugger
Voltage: 220V
Frequency: 50 - 60 Hz
Noise level: 63 db(A) – cf. IEC 60704 Standard
Flow: 620 m³/h – cf. IEC 61591 Standard
Lighting: 2 LED bulbs (2 x 1.3 W)
Electric Power: 260 W
aluminum filter: 3
Activated carbon filter: 1 – Ambifresh 2 (ref.: 94550/015).
During the transport of the Ambifresh 2 filter, it is possible that it releases a dust on the plastic that covers it, due to the compounds that the filter contains.
This will not affect the functioning of the filter, much less its efficiency.
Illustrative Images. The shades and finishes (textures) may vary from one product to another.

Usage Recommendations

Domestic use.
Check that the power supply voltage indicated on the product identification label located on the inside of the hood is the same as your home 127V or 220V, the hood is not dual voltage.
In the exhaust function, the vapors and smoke from the cooking process enter the hood, are filtered through the metal filter where the fat is retained and conducted to the external environment through a duct.
In the debugger function, the vapors and smoke pass through a metal filter where the fat is retained and through an activated carbon filter where the air is purified, returning to the odor-free environment. In this case, it is not necessary to make an external opening for the outlet duct.
In both functions it is necessary to periodically clean the metal filters, and in the debugger function, the charcoal filter must be replaced and never washed and reused as per the instruction manual.
It is recommended that the installation of the hood be carried out by the Tramontina Authorized Service Network.
Installation by the consumer.
The hood must be installed at a minimum height of 650 mm and a maximum of 750 mm from the cooktop or stove burners.
Comes with a template to help with installation.
The metallic filter must be washed at least once a week, when under normal conditions of use, or as needed, between this cleaning period do not use the hood without the metallic filter installed.
To increase the life of your product and avoid stains, clean the inside and outside of your hood frequently.
Consult an Authorized Technical Assistance Network to see if your hood model has an alternative chimney;
For more information on how to clean the product, consult the instruction manual.

Technical specifications

*For single product, these specifications refer to the product.

*For set, kit or game, these specifications refer to the packaging.

Ref: 95800033